an Easy to use tilt up wind generator tower
With these plans you can
build a tower for your wind generator that will allow you to easily raise and lower the pole for installation and maintenance.
This tower uses a winch to do all the heavy work for you. No trying to lift the pole and
hoping that it doesn't fall before getting it in to place. No more hurting your back to put
up your wind generator. You do not need to have anyone come help you to raise your tower
because it can be done with only one person. We give detailed instructions on how to use
materials available at most hardware stores, fencing supply companies and local metal yards,
to build this tower. We do have anchor kits and winches available for purchase.
The instructions come with several pages of detailed diagrams, materials list, and instructions.
Also if you have any questions you can e-mail for more instructions. Instructions
are for a 20 foot tower using a 1 1/2" (1 7/8"outside diameter) schedule 40 steel pipe
but you can change the dimensions if you need it to be taller. If you need to use a 2"
pipe it would be very simple for you to change the dimensions of the tower by simply placing
the two side pieces a little further apart. It will fit many different brands of wind
generators. It is designed for 6' or smaller wind generator. If you are going with a bigger wind
generator you would need to use larger pipe.
is only $15 plus shipping by either First Class Mail in the US or Air Mail outside of the US.
|Tower plans, sent in the US ( $1.17) total $16.17
|Tower plans, sent to Canada (1.46) total $16.46
|Tower plans, sent to all other areas of the world (2.80) total $17.80
Anchor kits available